Meelo+ se Twin tuners Linux Satellite Receiver
1).1300 MHz MIPS processor
2.1 GB DDR3 DRAM, 256MB Flash
3. 2 x DVB-S2 tuners
4. Support IPTV, HBBTV, APP
Specifications:
Features:
Transcoding function
Airplay feature
Opera Browser
HbbTV
HDMI 1.4
HD PIP
Gigabit Lan
Plug and Play support for 2.5 "SATA - Hard Drives
12 character VFD display
External 12 V power supply
Technical highlights:
1300 MHz MIPS processor
256MB Flash
1 GB DDR3 DRAM
Gigabit Lan
1 x DVB Common-Interface Slot
2 x Smart Card Reader (Xcrypt)
3 USB ports (1x front, 2x rear)
SPDIF optical audio output (digital)
1 x HDMI 1.4 video / audio output (digital)
1 x Scart (TV)
1 x RCA video output
2 x audio output (L / R) RCA (analog)
Plug and Play support for 2.5 "SATA - Hard Drives
unlimited channel lists for TV / Radio
EPG (electronic program guide) support
Support of Bouquet lists
OSD in many languages and skin-support automatic / manual
channel search DiSEqC 1.0/1.1/1.2, USALS
External 12 volt power supply
Power switch
MEELO SE Specifications:
2 x DVB-S2 tuners
Input frequency range 950 .. 2150 MHz
Signal Level - 65 dBm ... - 25 dBm
Tuner Input Connector F-Type female
Input impedance 75 ohms
AFC + / - 3.5 MHz
QPSK and 8PSK demodulation
FEC Viterbi and Reed-Solomon
Viterbirate 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9
Roll-off Factor 35% Common-Interface:
Common-Interface Power Consumption max. 0.35 A/5V video decoding:
Video Compression MPEG-2 / H.264 and MPEG-1 compatible
Video Standard PAL G / 25 Hz, NTSC
4:3 / 16:9
Letterbox for 4:3 TV-Device Output Digital:
Output Level 0,5 Vss on 75 Ohm Frequency: 32 kHz, 44.1 kHz, 48 kHz
S / PDIF optical, coaxial (AC3) audio decoder:
Audio compression MPEG-1 & MPEG-2 Layer I and II, MP3 Audio Mode Dual (main / sub), Stereo
Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
Output analog:
Output Level L / R 0,5 Vss on 600 Ohm
THD> 60 dB (1 kHz)
Crosstalk <-65 dB Video parameter:
Input Level FBAS 1 Vss + / - 0.25 dB on 75 Ohm TV Scart:
Output: FBAS, RGB, Ethernet over OSD: 1000/100/10 MBit compatible interface USB: USB 2.0 connector (3x) LNB power and DVB-S2 Tuner: LNB Current 400mA max. , Short-circuit proof LNB Voltage horizontal "no load 19.5 V" 17.6 V at 400mA LNB Voltage vertical "no load 14.5 V" 11,8 V at 400mA LNB is switched off in the standby mode, control of the satellite position: DiSEqC 1.0/1.1/1.2 and USALS - Rotor Control Power consumption: <13W (in operation, with LNB) <12W (in operation, without LNB) <0.5 W (Deep-Standby-Mode) Input voltage: External power supply: Input: 110-240V AC / 50-60Hz / 1,0 A Output: 12V = / 3,5 A
Ambient Temperature +15 �� C. .. +35 �� C Humidity <80% Dimensions (W x D x H): 280 mm x 200 mm x 50Weight: 2.0 kg without HDD
